Settings
92
Water plus
You can increase the amount of water
delivered in the wash programmes.
Options
–
Extra water
(factory default setting)
The water level is increased in the
wash and rinse stages of the
programme.
–
Extra rinse
An additional rinse cycle is carried
out.
–
Extra water + rinse
The water level is increased in the
wash and rinse stages and an
additional rinse is carried out.
Water plus level
There are four different water levels
which can be selected by activating
the
Water +
Extra.
Levels
–
Normal
(factory default setting)
–
Plus
–
Plus
–
Plus
Maximum rinse level
The water level in the rinse can be
permanently set to the highest value.
This function is important for allergy
sufferers as it achieves excellent rinse
results. The water consumption will be
increased.
The maximum rinse level is deactivated
as standard.
Suds cooling
When this is activated, additional
water flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a
Cottons programme with a temperature
of 70°C or higher is selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
Suds cooling is deactivated as
standard.
