Miele SmartLine CS 7611, Operating And Installation Instructions

Page: 31 / 72

Safety features
31
System lock / Safety lock
The lock function is deactivated if
there is a break in the mains supply.
Your SmartLine element is equipped
with a system lock and a safety lock to
prevent the element from being
switched on or any settings being
altered by mistake.
The system lock is activated when the
SmartLine element is switched on. If the
system lock is activated, the element
cannot be switched on and the timer
cannot be used. A set minute minder
time continues to count down. The
SmartLine element is programmed so
that the system lock must be activated
manually. It can be programmed to be
activated automatically 5 minutes after
the SmartLine element has been
switched off if it is not manually locked
first (see “Programming”).
The safety lock is activated when the
SmartLine element is switched on.
When the safety lock is activated, the
element can be operated only under
certain conditions:
– Selected power levels cannot be
changed.
– A set minute minder time can be
modified.
– The SmartLine element can only be
switched off.
If an unavailable sensor control is
touched whilst the system lock or
safety lock is activated

will appear
in the timer display for a few seconds
and a tone will sound.
Activating the system lock
 Touch the  sensor for 6 seconds.
The time will count down in the timer
display.

will appear once the time
has elapsed. The system lock has been
activated.
Deactivating the system lock
 Touch the  sensor for 6 seconds.

will appear briefly in the timer dis-
play and then the time will count down.
The lock function is deactivated once
the time has elapsed.