Miele SmartLine CS 7611, Operating And Installation Instructions

Page: 58 / 72

Worktop cut-out for flush-fit installation
58
Natural stone worktop Wooden worktop
* 7
+ 0.5
mm for CS 7611
Information for calculating the cut-out
The elements overlap the worktop by 10 mm.
When installing several elements, a distance of 2 mm must be observed between
the individual elements.
Calculating cut-out dimension A
1 element = width of the element plus 2 mm on the right, plus 2 mm on the left.
Several elements = total width of the elements plus 2 mm distance between the
elements, plus 2 mm on the right, plus 2 mm on the left
Calculating cut-out dimension B = cut-out dimension A minus 12 mm on the right,
minus 12 mm on the left.
Some examples are illustrated below.