Miele SmartLine CS 7611, Operating And Installation Instructions

Page: 24 / 72

Operation
24
Auto heat-up
When Auto heat-up has been activated,
the cooking zone switches on automat-
ically at the highest setting and then
switches to the continued cooking set-
ting which you have previously selec-
ted. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
Activating Auto heat-up

Touch the sensor for the continued
cooking setting you want until a tone
sounds and the sensor starts to
pulsate.
During the heat-up time (see chart), the
continued cooking level set will pulsate.
With extended power levels (see “Pro-
gramming”), the sensors for the power
levels in front of and after the interim
power level will pulsate if an extended
power level setting has been selected.
Altering the continued cooking setting
will deactivate Auto heat-up.
Deactivating Auto heat-up

Touch the sensor for the continued
cooking setting, or

Set another power level.
Continued cook-
ing setting
Heat-up time
[min : sec]
1 approx. 0 : 15
1. approx. 0 : 15
2 approx. 0 : 15
2. approx. 0 : 15
3 approx. 0 : 25
3. approx. 0 : 25
4 approx. 0 : 50
4. approx. 0 : 50
5 approx. 2 : 00
5. approx. 5 : 50
6 approx. 5 : 50
6. approx. 2 : 50
7 approx. 2 : 50
7. approx. 2 : 50
8 approx. 2 : 50
8. approx. 2 : 50
9 –
The continued cooking settings with a dot
after the number are only available if the
power level range has been extended (see
“Programming”).