Miele SmartLine CS 7611, Operating And Installation Instructions

Page: 40 / 72

Problem solving guide
40
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem Cause and remedy
The SmartLine element
cannot be switched on. There is no power to the SmartLine element.
 Check whether the mains fuse has tripped. Con-
tact an electrician or Miele Service (for the min-
imum fuse rating, see data plate).
There may be a technical fault.

Disconnect the appliance from the mains electri-
city supply for approx. 1 minute by
– tripping the relevant mains fuse or screwing the
fuse out completely, or
– switching off the residual current protection
device.

If, after resetting the trip switch in the mains fuse
box or the residual current protection device, the
appliance will still not turn on, contact a qualified
electrician or Miele Service.
A smell and vapours are
given off when the new
wok is being used. The metal components have a protective coating.
When the appliance is used for the first time, this
causes a smell and possibly also vapour. The material
from which the induction coils are made also gives off
a smell in the first few hours of operation. This smell
will be less noticeable with each subsequent use be-
fore dissipating completely. The smell and any vapour
given off do not indicate a faulty connection or appli-
ance and they are not hazardous to health.
The power level selec-
ted is flashing. The wok pan is not in position.

Place the wok pan in position.
After the SmartLine ele-
ment has been
switched on or a sensor
control has been
touched,

appears in
the timer display for a
few seconds.
The system lock or safety lock is activated.

Deactivate the system lock or safety lock (see
“System lock / Safety lock”).