Timer
28
Switching off a cooking zone
automatically
You can set a time after which the
cooking zone will switch off automatic-
ally. This function can be used on all
cooking zones at the same time.
The switch-off time is set with the nu-
merical keybank for each cooking
zone you want to switch off automat-
ically.
If the time programmed is longer than
the maximum operational time al-
lowed, the cooking zone will switch off
after the maximum time allowed (see
“Safety switch-off”).
Select a power setting for the zone
you require.
Touch the
sensor.
The indicator light will start to flash.
Select the time you require.
If you want to set another cooking
zone to switch off automatically, fol-
low the same steps as described
above.
If more than one switch-off time is
programmed, the shortest time re-
maining will be displayed, and the cor-
responding indicator light will flash.
The other indicator lights will light up
constantly.
If you want to show the time remain-
ing for another zone which is count-
ing down in the background, touch
the
sensor repeatedly until the in-
dicator light for the zone you require
flashes.
To change a switch-off time
Touch the
sensor repeatedly until
the indicator light for the zone you re-
quire flashes.
Select the time you require.
To delete a switch-off time
Touch the
sensor repeatedly until
the indicator light for the zone you re-
quire flashes.
Touch 0 on the numerical keybank.
Summary of Contents for SmartLine CS 7611
