Miele PT 5137 WP, Operating And Installation Instructions

Page: 42 / 68

Problem Possible cause Remedy
E
OK
Clean plinth filter
– The filter is clogged.
– The fluff filters in the
door and door
opening may also be
heavily clogged.
– Clean the filters as
described in "Cleaning
and care". . .
. . . "Cleaning the plinth
filter"
. . . "Cleaning the
surfaces of the fluff
filters".
To delete the message:
– Confirm with OK .
Please note: You can adjust the level of fluff at which
this message appears in the
Settings menu under
"Clean out airways".
E
OK
Open bottom right
grille. Clean airways
The cooling fins behind
the grille can become
blocked by dirt particles
drawn in with the room
air. – Clean these as
described in "Cleaning
and care - Bottom right
grille/airway".
To delete the message:
– Confirm with OK .
;
Fit plinth filter or
put it in the other
way around
– The plinth filter is
missing or has been
fitted the wrong way
round.
– Removing the filter
during a drying cycle
will cause the
programme to be
cancelled.
– Check the plinth filter.
;
Programme cannot
be changed
An attempt has been
made to alter a
programme while it is in
progress. – You will need to cancel
the current programme
before you can select a
new one.
2
OK
Drain fault
Check drainage
The drain hose is kinked. – Remove the kink.
To delete the message:
– Confirm with OK .
Problem solving guide
42