With the help of the following guide, minor faults in the performance of this dryer,
some of which may result from incorrect operation, can be put right without
contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
Check and fault messages in the display
Problem
Possible cause
Remedy
1
Adjust the load
This is not a fault.
The electronic unit has
recognised that there is no
laundry in the drum and
cancelled the programme.
Drying individual garments or
items which are already dry
can also cause the
programme to be cancelled.
– Use the
Warm air
programme (timed
drying) to dry
individual items.
To delete the message:
– Open the door.
:
OK
Power failure
Programme stopped
The dryer was switched off
during a drying programme
or there was a power cut.
– Confirm with
OK
.
– Start the programme.
;
OK
Technical fault.
Call Service
No obvious cause.
A programme cannot be
started while there is a fault
message in the display.
– Make a note of what
is shown in the
display.
– Confirm with
OK
.
– Try to start the
programme again.
Problem solving guide
41
Summary of Contents for PT 5137 WP
Page 65: ...65 ...
Page 66: ...66 ...
Page 67: ...67 ...
Page 68: ...Alteration rights reserved 3813 M Nr 09 754 890 01 ...
