Miele PG 8172, Operating Instructions Manual

Page: 61 / 244

Malfunctions
58
Pictogram Meaning Possible cause Remedy
Lower spray arm is
blocked
Spray arm is not correctly
engaged
Correctly engage the spray arm.
Spray arm obstructed by, e.g. a
piece of cutlery
Remove the obstruction.
Spray arm blocked by soiling
Clean the spray arm bearings
(
 8.2).
Upper spray arm is
blocked
Spray arm obstructed by, e.g. high
dishes
Remove the obstruction.
Spray arm blocked by soiling
Clean the spray arm bearings
(

8.2).
Filter cylinder
blocked
Heavily contaminated filter cylinder
Remove, clean and replace the
filter cylinder.
Energy optimisation
1
On-site energy optimisation
equipment switches individual
electrical consumers (heating
elements).
Wait until the on-site energy
optimisation equipment switches
off.
Pump inlet filter not
fitted
Missing pump inlet filter

The machine switches off
after 30 seconds and will not
be filled.
Fit the pump inlet filter and, if
necessary, switch the machine on
again.
INFO: When the prompt is
downgraded three times, the
machine can be switched on.
Pump inlet filter not
fitted despite three
prompts
Missing pump inlet filter
IMPORTANT: The circulating
pump and drain pump may get
damaged by drawing in, for
example, pieces of cutlery.
Fit pump inlet filter.
Automatic hood
opening
2
defective.
Defective motor
Contact an authorised service
technician for the repair.
Tank will be filled
A wash programme is started
while the machine is refilling Wait till the machine has been
filled.
Malfunction with
error code
Various
Display the error code (  9.1) and
assign the repair to an authorised
service technician.
1
is displayed only when the machine is connected to equipment with energy optimisation
2
Special equipment