Miele KFN 15943 D edt/cs Operating And Installation Instructions Download

Page: 82 / 88

Changing the door hinges

Inserting the upper soft-close
mechanism



Remove the cover



from the

panel



, turn it 180°, and reinsert it

on the other side.



Hook the spacer into the latch (A) on
the handle side.



Hook the soft-close mechanism into
the latch (B) on the machine side.

Push both parts out so that they are
firmly engaged.



Use the screw



to secure the

spacer and soft-close mechanism in
place.



Attach the panel



onto the soft-

close mechanism bracket





Slide the cover



on from the side so

that the openings for the pin



are

aligned.



Pull the soft-close mechanism
bracket



toward the hinge plate and

insert the pin



from above so that

the square sits in the depression.



Snap the cover



completely in

place.

Make sure that the cover



fits properly

so that the door can be closed without
hindrance and the pin is secured.



Remove the safety device



Summary of Contents for KFN 15943 D edt/cs

























































































Search results

Summary of Contents for KFN 15943 D edt/cs

Reviews:

Related manuals for KFN 15943 D edt/cs

Brands by name

Popular brands

Miele KFN 15943 D edt/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 15943 D edt/cs

Reviews:

Related manuals for KFN 15943 D edt/cs

Brands by name

Popular brands