Miele KFN 15943 D edt/cs Operating And Installation Instructions Download Page 21

Page: 21 / 88

Accessories

Ice cube tray

Cool pack

The cool pack prevents the temperature
in the freezer rising too quickly in the
event of a power outage. This can help
prolong the storage time.

The cool pack will be at its most effec-
tive after it has been in the freezer for
approx. 24 hours.

Optional accessories

A range of useful Miele accessories and
care products are available for your ap-
pliance.

KKF-RF
Active AirClean replacement filters

Replacement filters to fit the Active Air-
Clean holder are available. We recom-
mend replacing the carbon filters every
6 months.

KKF-FF Active AirClean carbon filter
with holder

Carbon filters neutralize unpleasant
odors in the refrigerator section for im-
proved air quality.

The carbon filter holder clips onto the
protective strip at the back of the shelf
and can be moved as necessary.

Accessories are available to order via
the Miele Webstore, from Miele di-
rectly (see back cover for contact de-
tails) or from your Miele dealer.

Summary of Contents for KFN 15943 D edt/cs

























































































Search results

Summary of Contents for KFN 15943 D edt/cs

Reviews:

Brands by name

Popular brands

Miele KFN 15943 D edt/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 15943 D edt/cs

Reviews:

Brands by name

Popular brands