Miele KFN 15943 D edt/cs Page 31 Operating And Installation Instructions Download | Manualshive

Page: 31 / 88

background image

Selecting additional settings

31

Selecting additional settings

In Settings mode, certain settings can
be adjusted and functions selected, al-
lowing you to adjust the machine to suit
your requirements.

See the following pages for more infor-
mation on these settings.

The door alarm and any other alarm
messages are automatically sup-
pressed when you are in Settings
mode, and no alarm will sound. Ex-
ception: If there is a machine fault (F
+numbers), Settings mode will be ex-
ited automatically. The fault code will
be shown on the display and an alarm
will sound (see "Frequently asked
questions") – Messages on the dis-
play").

The freezer section control panel (to
the right-hand side of the display)
must be used to apply the desired set-
tings.

Settings overview

Turning Sabbath mode on and off



Setting the display brightness



Changing the temperature unit
(°C/°F)



Activating and deactivating the
safety lock



Sabbath mode

The appliance offers a Sabbath mode
for the purposes of religious obser-
vance.

The following are turned off:

– the interior lighting when the appli-

ance door is opened,

– all audio and visual signals,

– temperature displays,

– DynaCool, Automatic SuperCool, and

SuperFrost (if previously turned on).

To activate Settings mode, the Super-
Frost button can continue to be se-
lected.

The Sabbath mode function will turn off
automatically after approx. 120 hours.

Ensure that the appliance doors are
properly closed, as audio and visual
alarms are turned off.

Any power failure during this time will
not be shown on the display. After a
power failure, the appliance will start
up in Sabbath mode.

«
...
29
30
31
32
33
...
»

Summary of Contents for KFN 15943 D edt/cs

























































































Reviews:

No comments

Related manuals for KFN 15943 D edt/cs

Brand: GE Pages: 132

Brand: GE Pages: 2

Brand: U-Line Pages: 2

Profile PSC23SGR

Brand: GE Pages: 2

Profile PDCF1NBW

Brand: GE Pages: 56

Profile ENERGY STAR PFE27KSDSS

Brand: GE Pages: 1

Monogram ZIS36N

Brand: GE Pages: 24

Brand: GE Pages: 92

Monogram ZDOD240

Brand: GE Pages: 8

Brand: GE Pages: 1

Brand: GE Pages: 2

Profile GSHF3KGZ

Brand: GE Pages: 2

Brand: GE Pages: 96

Brand: GE Pages: 174

Profile PGCS1PJZSS

Brand: GE Pages: 2

Profile PCF23MGW

Brand: GE Pages: 132

Profile PSHF6YGZ

Brand: GE Pages: 132

Visair IN-VA10-A004

Brand: FPG Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands