Miele KFN 15943 D edt/cs Page 18 Operating And Installation Instructions Download

Page: 18 / 88

Guide to the appliance

Display LEDs and symbols on the display

Display LED

Meaning



Automatic SuperCool
(left)/SuperFrost (right)

The function can be selected depending on
the section (see "Using SuperFrost, Auto-
matic SuperCool, and DynaCool").



Power failure

Flashes in the event of a power failure



Safety lock

Lock to stop the machine being turned off
by mistake



DynaCool

The function can be selected (see "Using
SuperFrost, Automatic SuperCool, and Dy-
naCool").



Alarm

Flashes when the door or temperature alarm
is triggered

Information on the display

Meaning

DEMO

Demo mode

Demo mode has been activated (see "Fre-
quently asked questions) – Messages on the
display").



Sabbath mode

Turning Sabbath mode on and off

Settings mode

Lights up when settings are being adjusted

°F

Temperature unit

The default setting is

°F

; this can be

switched to

°C

Summary of Contents for KFN 15943 D edt/cs

























































































Search results

Summary of Contents for KFN 15943 D edt/cs

Reviews:

Related manuals for KFN 15943 D edt/cs

Brands by name

Popular brands

Miele KFN 15943 D edt/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 15943 D edt/cs

Reviews:

Related manuals for KFN 15943 D edt/cs

Brands by name

Popular brands