Changing the door hinges
72
The machine is supplied with right-hand
hinging. If left-hand hinging is required,
the hinges must be changed.
Always change the door hinging
with the assistance of another per-
son.
If the door seal is damaged, the
machine door may not close properly
and cooling performance will be re-
duced.
Condensation will form in the inside
and this can cause a build-up of ice.
Do not damage the door seal.
Preparing to change the door hinging
To change the door hinging, you will
need the following tools:
Place a suitable cover on the floor in
front of the machine to protect the
machine doors and your floor from
damage while you are changing the
hinging.
Remove the adjustable shelves/bottle
shelf from the machine door.
Removing the door handles
When you pull the door handle
, the
sidebar
slides back.
Pull the sidebar
firmly back and
out of the guide.
Now loosen the four screws (TX15) in
the mounting plate and remove the
handle.
Remove the cover caps from the op-
posite side and fit them into the
empty holes.
Summary of Contents for KFN 15943 D edt/cs
Page 70: ...Installation 70 Appliance dimensions ...
Page 85: ......
Page 86: ......
Page 88: ...M Nr 10 738 470 02 en USA CA KFN 15943 D edt cs ...