Miele KFN 15943 D edt/cs Page 78 Operating And Installation Instructions Download

Page: 78 / 88

Changing the door hinges

Removing the lower appliance
door



Close the lower appliance door.



Danger of injury when removing

the lower appliance door!
As soon as the hinge pin has been
removed from the lower appliance
door in the following instructions, the
door is no longer secure.
The appliance door must be held by
a second person.



Remove the hinge pin



from the

middle of the appliance by pulling it
up.

Tip:

Please note that the gray plastic

cover



on the middle hinge plate can

fall off when the door is being removed.



Carefully lift the lower appliance door
up and off, and put it to one side.



Pull the cover



off.



Unscrew the hinge plate



, turn it

180°, and screw it into place on the
opposite side.



Turn the plastic cap



180° and refit

it in the middle of the hinge plate





Attach the cover



on the opposite

side.



Lift the plugs



for the two appliance

doors out of the door bushing and
reinsert them on the opposite side.

Summary of Contents for KFN 15943 D edt/cs

























































































Search results

Summary of Contents for KFN 15943 D edt/cs

Reviews:

Related manuals for KFN 15943 D edt/cs

Brands by name

Popular brands

Miele KFN 15943 D edt/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 15943 D edt/cs

Reviews:

Related manuals for KFN 15943 D edt/cs

Brands by name

Popular brands