Miele KFN 15943 D edt/cs Operating And Installation Instructions Download | Manualshive

Page: 5 / 88

background image

IMPORTANT SAFETY INSTRUCTIONS

5

This appliance complies with all statutory safety requirements.
Please note that inappropriate use can lead to personal injury and
damage to property.

To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time. They contain important notes on installation, safety, use and
maintenance.

Miele cannot be held liable for non-compliance with these instruc-
tions.

Keep these instructions in a safe place and ensure that new users
are familiar with the contents. Pass them on to any future owner.



Danger of injury!

Due to the sheer size and weight of the appliance, it needs to be
ensured that it cannot tip forward when the door is open and fully
stocked.

Set up the appliance with the supplied anti-tip devices in accor-
dance with the operating and installation instructions.

Use



This appliance is intended for use in the home and similar environ-

ments.
This appliance is not intended for use outdoors, in damp environ-
ments or in places exposed to rain.



This appliance is intended for domestic use only for cooling and

storing food and drink as well as for storing deep frozen food, freez-
ing fresh food and for making ice.
Any other usage is not supported by the manufacturer and could be
dangerous.

«
...
3
4
5
6
7
...
»

Summary of Contents for KFN 15943 D edt/cs

























































































Reviews:

No comments

Related manuals for KFN 15943 D edt/cs

Brand: Randell Pages: 2

Brand: Randell Pages: 20

Brand: Randell Pages: 2

Brand: ETNA Pages: 116

Brand: Iarp Pages: 40

Brand: Fhiaba Pages: 27

Brand: Avanti Pages: 16

Brand: Hotpoint Pages: 16

Brand: Maytag Pages: 36

BR22TW-P1196709WW

Brand: Amana Pages: 54

Brand: Avantco Pages: 41

Brand: Linea 2000 Pages: 76

Brand: ECG Pages: 116

Brand: V-ZUG Pages: 44

Brand: Malloca Pages: 38

Brand: Gram Pages: 100

Brand: Caple Pages: 17

Brand: Smeg Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands