Miele CVA 4070 EN-CA Technical Information Download Page 89

Page: 89 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

6.0

Fault

Diagnosis

6.1

Programming Mode

Initial requirements

1. Switch the appliance off.

Accessing

Note

Access has to be completed within 10 seconds.

2. Touch pad

Clear

and hold it.

3. Touch pad

On/Off

once.

4. Release pad

Clear.

5. Touch pad

Clear

5 times and at the 5th time, hold it until the

programming mode appears.

Acknowledgement indicator

The display shows the positions of the programming mode

Programming.

Options

1. Touch the pad next to the desired position (refer Table).
2. Touch the pad next to the desired setting (refer Table).

Back (without saving)

: Touch pad

Clear

Save and quit

Save and back:

Touch pad next to

To end:

Touch pad

On/Off

Quit (without saving)

1. Touch pad

On/Off

Summary of Contents for CVA 4070 EN-CA




































































































































Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands

Miele CVA 4070 EN-CA, Technical Information

Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands