Miele CVA 4070 EN-CA Technical Information Download Page 108

Page: 108 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

6.1.11

Coffee Count – Indicate

Initial requirements

1. Switch the appliance off.

Accessing

Note

Complete the access within 10 seconds.

1. Touch pad

Clear

and hold.

2. Touch pad

On/Off

once.

3. Release pad

Clear

4. Touch pad

Clear

5 times and at the 5th time, hold it until the

programming mode appears.

Acknowledgement indicator

The display shows the positions of the programming mode

Programming.

Options

1. Touch pad next to

coffee total.

2. The display shows the total number of coffee, espresso and
cappuccino

dispensed.

Save and quit

Save and back:

Touch pad next to

OK.

End:

Touch pad

On/Off.

Quit (without saving)

1. Touch pad

On/Off.

108

Summary of Contents for CVA 4070 EN-CA




































































































































Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Brands by name

Popular brands

Miele CVA 4070 EN-CA, Technical Information

Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Brands by name

Popular brands