Miele CVA 4070 EN-CA Technical Information Download Page 120

Page: 120 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

6.2

Service Mode Overview

Initial requirements

1. Switch the appliance off.

Accessing

Note

Complete the access within 10 seconds.

1. Touch pad

Clear

and hold.

2. Touch pad

On/Off

once.

3. Release pad

Clear.

4. Touch pad

Clear

3 times and at the 3rd time, hold it until the service

mode appears.

Acknowledgement indicator

The display shows the positions of the

Service

mode.

Options

1. Touch the pad next to the desired position (refer).
2. Touch the pad next to the desired activation (refer).
3.

Back:

Touch pad

Clear.

Save and quit

1. Touch pad On/Off.

Position

Display / Activation

Description / Results

EPX

e. g. ID01087 V21

The ID number of the control
electronic is displayed

ID NUMBER

EPL

e. g. ID33849 V10

The ID number of the power
electronic is displayed

registered faults,
refer to 021 Table 2

All faults that have occurred so
far are indicated. To show the
fault description, touch the pad
next to the fault.

FAULT MEMORY

Delete

All saved faults are deleted.

Open

The solenoid for steam is
opened.

COMPONENT
TEST

STEAM
VALVE

The solenoid for steam is
closed.

Table 6-8:

CVA4070 Service Mode (Continued on Table 6-9)

120

Summary of Contents for CVA 4070 EN-CA




































































































































Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands

Miele CVA 4070 EN-CA, Technical Information

Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands