manualshive.com logo in svg

Miele CVA 4070 EN-CA, Technical Information

Share
Download
Miele CVA 4070 EN-CA Technical Information Download Page 85

 
 

Technical Information 

 

CVA4070 / CVA4075 Coffee Systems 

 

5.15    

Power Electronic EPL – Remove 

1.   Appliance – Remove from cabinet”, (Figure 5-1). 
2.   Remove the rear wall retaining screws at the top. 
3.   Remove the top rear wall. 

 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

1 Power electronic retaining screws 

 

 

   Figure 5-46: 

CVA4070 Power Electronic Retaining Screws Removal

 

 

 

4.   Remove the screws of the power electronic (Figure 5-46, Item 1). 
5.   Remove the power electronic. 
6.   Pull the connectors off the power electronic. 

 

Note:

 Power electronic EPL 860 is shipped with an adapter wire and 

conversion instructions.  This conversion is designed to adapt the same 
electronic to the USA (CVA 4070/4075) and European Versions. This 
conversion is applied to European coffeemakers only. The adapter wire 
and conversion should be ignored when replacing the electronic in USA 
model variants. 

 
 
 
 
 
 
 

 

85 

Summary of Contents for CVA 4070 EN-CA




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands