Miele CVA 4070 EN-CA Technical Information Download Page 98

Page: 98 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

6.1.2

Language – Set

Initial requirements

Switch the appliance off.

Accessing

Note

Complete the access within 10 seconds.

1. Touch pad

Clear

and hold.

2. Touch pad

On/Off

once.

3. Release pad

Clear.

4. Touch pad

Clear

5 times and at the 5th time, hold it until the

programming mode appears.

Acknowledgement indicator

The display shows the positions of the programming mode

Programming

Options

1. Touch pad next to

Language

2. Touch the pad next to the desired language.
3.

Back (without saving):

Touch pad

Clear.

Available languages:

cestina, dansk, deutsch, english, espanol,

francais, italiano, magyar, nederlands, norsk, polski, português, suomi,
svenska, türkce, greek, russian.

Note

The language remains even if the factory setting is restored.
If the language is not set correctly, use the bilder\t4640s02.tif icon as a
guide to get to the setting for language.

Save and quit

1. Save and back: Touch pad next to

OK.

End:

Touch pad

On/Off.

Quit (without saving)

1. Touch pad

On/Off.

Summary of Contents for CVA 4070 EN-CA




































































































































Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands

Miele CVA 4070 EN-CA, Technical Information

Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands