Miele CVA 4070 EN-CA Technical Information Download Page 125

Page: 125 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

6.3

Fault Codes – Read, Save and Delete

6.3.1

Fault Code Accessing

Initial requirements

Switch the appliance off.

Accessing

Note

Complete the access within 10 seconds.

1. Touch pad

Clear

and hold.

2. Touch pad

On/Off

once.

3. Release pad

Clear

4. Touch pad

Clear

3 times and at the 3rd time, hold it until the service

mode appears.

Acknowledgement indicator

The display shows the positions of the

Service mode

Options

1. Touch pad next to Fault memory.
2. To show the fault description, touch the pad next to the fault.
3. Save the fault and back: Touch pad next to OK. Touch pad Clear.
4. Delete the fault and back: Touch pad next to delete.

Faulty codes Refer to Tables:

Save and quit

1. Touch pad On/Off.

125

Summary of Contents for CVA 4070 EN-CA




































































































































Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands

Miele CVA 4070 EN-CA, Technical Information

Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands