Miele CVA 4070 EN-CA Technical Information Download Page 97

Page: 97 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

6.1.1

Reset

Initial requirements

1. Switch the appliance off.

Accessing

Note

Complete the access within 10 seconds.

1. Touch pad

Clear

and hold.

2. Touch pad

On/Off

once.

3. Release pad

Clear

4. Touch pad

Clear

5 times and at the 5th time, hold it until the

programming mode appears.

Acknowledgement indicator

The display shows the positions of the programming mode

Programming

Options

1. Touch the pad next to

Reset.

No:

Back, without Reset.

Yes:

All settings made by the customer (except language) are

deleted. All own user profiles are deleted. The fault code
memory remains.

Save and quit

1. Touch the

On/Off

pad.

Summary of Contents for CVA 4070 EN-CA




































































































































Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands

Miele CVA 4070 EN-CA, Technical Information

Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands