Miele CVA 4070 EN-CA Technical Information Download Page 23

Page: 23 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

3.3 Clock

Settings

1. Select "Settings".

2. Select "Clock".

3.3.1

Setting the Time of Day

1. Select "Enter Time".
2. Select "+" or "-" with the right touch controls to select the hours.
3. Set the minutes by selecting "Minutes".
4. Select "+" or "-" with the right touch controls to select the minutes.
5. Select "OK".

3.3.2

Clock Display Size

The size of the clock display can be adjusted. The options are "normal" or
"large".

1. Select the "Size" touch control.

•

The selected size is highlighted in the display.

2. Select the "Size" touch control until the desired size is highlighted.
3. Select "ok" to save the selection.

3.3.3

12 or 24 Hour Clock

The clock display can be set to the 12 or 24 hour clock.

1. Select the respective touch control. The selected display is
highlighted.
2. Select "OK" to save the selection.

Summary of Contents for CVA 4070 EN-CA




































































































































Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands

Miele CVA 4070 EN-CA, Technical Information

Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands