Miele CVA 4070 EN-CA Technical Information Download Page 111

Page: 111 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

6.1.14

User Profile – Set

Initial requirements

Switch the appliance off.

Accessing

Note

Complete the access within 10 seconds.

1. Touch pad

Clear

and hold.

2. Touch pad

On/Off

once.

3. Release pad

Clear.

4. Touch pad

Clear

5 times and at the 5th time, hold it until the

programming mode appears.

Acknowledgement indicator

The display shows the positions of the programming mode

Programming.

Options

1. Touch pad next to User profile.
2. Touch pad next to the desired setting or activation.
3.

Back (without saving):

Touch pad

Clear.

select:

The main menu shows the selected user profile. In the menu item

“settings”, the grinding amount, temperature, pre-brewing and
portion size can be set for the respective user profile.

Factory setting:

Standard. The settings for the grinding amount,

temperature, pre-brewing and portion size are as in the
factory setting.

create:

Create a new user profile (e. g. name). A maximum of 7 user
profiles are possible.

change name:

Change the name of a user profile.

delete:

Delete a user profile.

Change-over:

never:

The main menu indicates the user profile and never changes over
to standard.

at switch-on:

As the appliance is switched on, the main menu changes

to a standard user profile.

111

Summary of Contents for CVA 4070 EN-CA




































































































































Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands

Miele CVA 4070 EN-CA, Technical Information

Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands