![background image](http://html.mh-extra.com/html/miele/62858371cdn/62858371cdn_operating-instructions-manual_234500054.webp)
Operation
54
Selecting a program
Program selection
buttons
Select a program using program selection buttons
,
or
.
Program list
Press the
button,
use the
and
arrow buttons to highlight a program, and confirm
your selection with
OK
.
Universal
Temperature
Duration
h
1:30
75 °C
The LED in the button selected lights up and the relevant program
appears on the display. The LED in the
Start/Stop
button also starts
to flash.
Another program can be selected at any time before a program has
started. Once it has started, program selection is locked.
The different program and their uses are described in “Program
charts” at the end of these operating instructions.
Always select the program depending on the type of load items and
degree and type of soiling, or on infection prevention issues.
Starting a program
Close the door.
When the door is closed, the LED in the
button will light up.
Press the
Start/Stop
button.
The LED in the
Start/Stop
button will light up constantly and the
LED in the
button will go out.
Starting a
program using
delay start
The start of a program can be delayed; for example, to benefit from
economy rates of electricity or to clean the wash cabinet before it is
used the next day. Starting from the programmed time, a delay start
time between 1 minute and 24 hours can be selected in one-minute
increments (see “Settings
/ Time of day”).
Delay start must be switched on (see “Settings
/Delay start”).
If soiling is left to dry on the load items for a long time, the
reprocessing result can be adversely affected. There is also a risk
of corrosion for stainless steel load items.