Program settings
101
The action desired at different spray arm rotational speeds is set in
each wash block.
...
Select wash block, e.g.:
Main wash 1
Spray arm monitoring
Spray arm monitoring
On -> Warning
On -> Stop
-
On -> Stop
A program in operation is interrupted if the rotational speed
deviates. The interruption is shown on the display and noted in the
cycle report.
-
On -> Warning
The program continues to run normally if the rotational speed
deviates. Only a message appears on the display and the deviation
is noted in the cycle report.
-
Off
No message appears and the program continues to run normally.
Select an option using the
and
arrow buttons.
Press
OK
to save the setting.
