![background image](http://html.mh-extra.com/html/miele/62858371cdn/62858371cdn_operating-instructions-manual_234500013.webp)
Warning and Safety Instructions
13
This machine complies with all statutory safety requirements.
Inappropriate use can, however, lead to personal injury and
material damage.
Read these instructions carefully before using it for the first time to
avoid the risk of accidents and damage to the machine.
Keep these instructions in a safe place and make sure they are
available at all times to any user of the machine.
Correct application
This machine is designed for use with the applications described in
these operating instructions only. Alterations or conversions to the
machine, or using it for purposes other than those for which it was
designed, are not permitted and could be dangerous.
This machine must only be used for cleaning laboratory glassware
and utensils if the manufacturer has stated that they are suitable for
machine reprocessing. Manufacturer's cleaning and maintenance
instructions must also be observed.
This machine is intended for indoor use in a stationary location
only.
Risk of injury
Please pay attention to the following notes to avoid injury!
The machine may only be installed, commissioned, repaired, and
maintained by Miele Service or a suitably qualified service technician.
A Miele service contract is recommended to ensure full compliance
with the normative and regulatory provisions. Incorrect repairs can
cause considerable danger to users.
Do not install the machine in an area where there is any risk of
explosion or of freezing conditions.
In order to reduce the risk of water damage, the area around the
machine should be limited to furniture and fittings that are designed
for use in commercial environments.
Some metal parts pose a risk of injury/being cut. Wear cut-
resistant protective gloves when transporting and setting up the
machine.
If the machine is built under, it must only be installed under a
continuous worktop run which is firmly secured to adjacent units to
improve stability.
The electrical safety of this machine can only be guaranteed when
it is correctly grounded. It is essential that this standard safety
requirement is met. If in any doubt, please have the electrical
installation tested by a qualified electrician. Miele cannot be held
liable for the consequences of an inadequate earthing system (e.g.
electric shock).