Program settings
105
Set wash block
temperature
The wash block temperature is reached by heating up the wash
water. The temperature must be suited to the requirements of the
task.
At temperatures over 55°C, protein denaturing occurs which can
cause the soiling to fix.
Infection prevention requirements must be observed as
appropriate.
...
Wash block temperature
Wash block temp.
Set
Without heating
-
Without heating
The wash water is not heated up. The temperature in the wash
cabinet is the result of the temperature of the previous wash block
and the the incoming tap water temperature.
-
Set
Setting a wash block temperature.
Select an option using the
and
arrow buttons.
Press
OK
to save the setting.
When
Set
is selected the wash block temperature must then be
entered.
Wash block temp.
60
(30 - 93
°C
°C)
Adjustment is in increments of 1. The possible range is shown in the
bottom line.
Dispensing of process chemicals occurs at a default dispensing
temperature set at the factory. If process chemicals are to be
dispensed in this wash block, the lowest temperature that can be set
will be the dispensing temperature. It is not possible to set a lower
value.
Use the arrow buttons
(higher) and
(lower) to set the wash
block temperature.
Press
OK
to save the setting.
