Midea Aqua Tempto Power Series, Manual

Page: 129 / 213

MCAC-ATSM-2014-09 Aqua tempo power series tropical air-cooled scroll chiller 50Hz
127
Click the “System operate set” in the conditioner of without Control Mode has been selected, a message box
as Fig. 4-85 would show.
Click the “System operate set” in the conditioner of without Mode set has been selected, a message box as
Fig. 4-86 would show.
Click the “System operate set” in the conditioner of without Setting temp. has been selected, a message box
as Fig. 4-87 would show.
2
）
Set wired controller separately: Do not tick the
“
Uniformly Set
”
. Select the wanted set wired controller
(refrigeration system) from the wired controller address column and select the corresponding set parameters,
which include control Mode (Auto), Mode set (cooling/heating/Water pump/turn-off), Setting temp. (Cooling:
5~17
℃
; Heating:45~50
℃
). After set up all above parameters (See Fig. 4-88), please click the
“
System
operate set
”
, system begins to set up. A message box (See Fig. 4-89) will pop up. Once successful setting, a
message box as Fig. 4-90 will display to inform you Successful System Set, whereas, Failed System set as
Fig. 4-91 will display.
Fig.4-85
Fig.4-86
Fig.4-87
Fig.4-88
Fig.4-89
Fig.4-90
Fig.4-91