Midea Aqua Tempto Power Series, Manual

Page: 121 / 213

MCAC-ATSM-2014-09 Aqua tempo power series tropical air-cooled scroll chiller 50Hz
119
If no Mode set has been set, a message box as Fig. 4-42 would pop up.
If no Setting temp. has been set, a message box as Fig. 4-43 would pop up.
（
2
）
Detail procedures of modify a Weekly Timing Schedule:
a
、
Select a wired controller: By clicking the
“
System diagram for weekly timing AC
”
wired controller icon at
the left side in the wired controller, or by selecting the wired controller at the drop-down box of
“
KJR
Address
”
.
b
、
Select a wired controller: By clicking the Period of the
“
System diagram for weekly timing AC
”
at the left
side in the wired controller, or by selecting the wanted modified Period at the drop-down box of
“
Period
”
.
c
、
Detail parameter for modifying weekly timing schedule:
Time On
：
Turn on time, when Time On selecting
”
--
：
--
“
, then means do not turn on the unit , display as Fig
4-44.
Time Off
：
Turn off time, when Time Off selecting
”
--
：
--
“
, then means do not turn off the unit , display as Fig
4-45.
Timing Status
：
Drive up the weekly timing function in the current period or not.
Control Mode
：
Automatically drive-up mode
Mode set
：
Heating
、
Cooling
、
Water Pump
Setting temp.
：
Setting temp.
If other parameters have been set, click “Save” key, a message box as the same as above” (1) Detail
procedures of add a new Weekly Timing Schedule” will pop up.
Once the setting time is reach, system will set according to the setting parameter, window as Fig. 4-46 will
display. When finish the set up, message box will close automatically.
Fig.4-41
Fig.4-42
Fig.4-44
Fig.4-45