Chapter 4: Using the Command Line Interface
156
Variables:
•
<option> is one of these options:
true
or
false
.
Mode
Description
true
Customized NTP server settings override the DHCP-specified NTP servers.
false
Customized NTP server settings do NOT override the DHCP-specified NTP servers.
Deleting an NTP Server
The following commands delete the primary and/or secondary time server(s).
To delete the primary time server:
config:#
time ntp firstServer ""
To delete the secondary time server:
config:#
time ntp secondServer ""
Setting the Time Zone
The CLI has a list of time zones to configure the date and time for the PDU.
config:#
time zone
After a list of time zones is displayed, type the index number of the time zone or press Enter to cancel.
Example
To set the time zone:
1.
Type the time zone command as shown below and press Enter.
config:#
time zone
2.
The system shows a list of time zones. Type the index number of the desired time zone and press Enter.
3.
Type
apply
for the selected time zone to take effect.
Customizing the Date and Time
If intending to manually configure the date and time, use the following CLI commands to specify them.
Note: You shall set the time configuration method to "manual" prior to customizing the date and time. See Determining the
Time Setup Method (on page 67).