Chapter 4: Using the Command Line Interface
156
Displayed information:
•
Without the parameter "details," only the sensor ID, sensor type and reading are displayed.
Note: A state sensor displays the sensor state instead of the reading.
•
With the parameter "details," more information is displayed in addition to the ID number and sensor reading, such as
the serial number, sensor position, and X, Y, and Z coordinates.
Note: DPX sensor packages do not provide chain position information.
Environmental Sensor Package Information
Different from the "
show externalsensors
" commands, which show the reading, status and configuration of an
individual environmental sensor, the following command shows the information of all connected environmental sensor
packages, each of which may contain more than one sensor or actuator.
#
show peripheralDevicePackages
Information similar to the following is displayed. An environmental sensor package is a peripheral device package.
Peripheral Device Package 1
Serial Number:
AEI7A00022
Package Type:
DPX-T1H1
Position:
Port 1
Package State:
operational
Firmware Version: Not available
Peripheral Device Package 2
Serial Number:
AEI7A00021
Package Type:
DPX-T3H1
Position:
Port 1
Package State:
operational
Firmware Version: Not available
Actuator Information
This command syntax shows an actuator's information.
#
show actuators <n>
To show detailed information, add the parameter "details" to the end of the command.
#
show actuators <n>
details
