Microtronics myDatalogGauge 3G, User Manual

Page: 81 / 158

Chapter 10 User interfaces
11 Indicates that the values for the trimming and sensor offset entered via the "Measurement channels"
configuration section (see "Measurement channels" on page 83) have not yet been stored in the BLE
Gauge . The symbol is hidden as soon as the values read-back from the BLE Gauge match the values in
the "Measurement channels" configuration section. An additional connection establishment may be
required for this.
12 Date when the battery of the BLE Gauge assigned to the measurement channel is likely to need
replacing and remaining days until this date
13 List of tags that are already assigned to the site. This assignment can be cancelled by clicking on the
cross next to the title of the tag. The input screen for assigning tags can be opened by clicking on the plus
symbol.
"Site" configuration section when transport mode is activated
1 Transport mode activated. This means that all of the operations (measurement, recording, transmission,
etc.) are stopped to minimise energy consumption during transport or storage.
Note: During normal operation, information on the BLE Gauge that are assigned to the two
measurement channels is displayed instead of the operation mode.
Rev. 01 81