Microtronics myDatalogGauge 3G, User Manual

Page: 113 / 158

11.5.6.1 Existing connection to the myDatalogGauge 3G
If there is an existing connection to the myDatalogGauge 3G , there is an option to only synchronise the
measurement data and configurations with the DeviceConfig configuration program for local processing or to
transfer them to the myDatanet server. In the event that your PC is not connected to the Internet when
reading out the data, you can initially synchronise the measurement data and configurations of the
myDatalogGauge 3G with the DeviceConfig configuration program. As soon as your PC establishes a
connection to the Internet, for example when you return to the office, you can then complete the
synchronisations between the DeviceConfig and myDatanet server (see "No connection to a device" on
page 114).
"Sync" tab when connected to the myDatalogGauge 3G
1 Checkbox to determine whether the measurement data and configurations should also be synchronised
with the server when clicking on the Sync button.
Note: This checkbox is only displayed if your PC is already connected to the Internet.
2 Button to trigger synchronisation
Rev. 01 113