Microscan MS-710, User Manual

Page: 133 / 186

Chapter 9 Utilities
MS-710 Scanner User’s Manual
9-11
9
–
U
ti
li
ti
es
Master Symbol
You can enter, edit, delete, and send and receive master symbol data that can be stored
in your scanner and ESP for matchcode operations. For matchcode setup, see Chapter
7, “Matchcode.”
Enter Master Symbol Data
Definition: This command allows the user to enter text as the master symbol.
ESP: 1. To access, click the Master Symbol tab.
2. Click the Matchcode Type check box if not checked.
3. Do one of the following to enter master symbol data:
a) Type data directly into text block and click Send or Send and
Save .
b) Click Read Symbol as Master to enter the next decoded symbol
as the master symbol in ESP and the scanner.
Serial Cmd: < )data) > (Enter text in place of data.)
If blank, click
here to enable
Matchcode.
Do this first.
Loads the scanner’s
saved master sym-
bol into ESP.
Sends and saves
the displayed
master symbol to
the scanner.
Deletes the master symbol in ESP
Reads current
symbol into ESP
as the master.
Sends the displayed
master symbol to
the scanner.
Enter or display master symbol here