Microscan MS-710, User Manual

Page: 115 / 186

Chapter 7 Matchcode
MS-710 Scanner User’s Manual
7-9
7–Mat
chcode
New Master Pin
Usage: Some applications require the line worker to change the master symbol.
This can be done by installing a switch at the location of the scanner. It is
very common to have a keyed switch so that accidental switching does
not occur.
Definition: After New Master Pin is enabled, a pulse can be received on the new
master pin which will cause the scanner to record the next decoded sym-
bol symbol(s) as the new master symbol(s).
It is important to note that the enabling
New Master Pin does not in
itself cause a master symbol to be recorded. The master pin must then
be activated momentarily (for a minimum of 10 ms) before a master
symbol can be scanned into memory. (See “Electrical Specifications”
on page A-5 .)
Serial Cmd: < Kzstatus >
Default: Disabled
Options: 0 = Disabled 1 = Enabled