Microscan MS-710, User Manual

Page: 163 / 186

Appendices
MS-710 Scanner User’s Manual
A-23
Appendix
Initializing
Initializing occurs whenever any command or set of commands is implemented.
Initializing is a part of all save and default functions. It is also used as a follow-on to
implement serial configuration commands.
• Initializes serial configuration commands into
active memory and resets counters to zero.
• Does not save settings for power-on.
By Serial Command
Send
<A> after a serial configuration command or a
string of serial configuration commands, for exam-
ple, <Kd1><A> .
By ESP
Right-click in the configuration window and select Save to Reader, Send No Save.
This will initialize all serial configuration changes that have been made in the current
ESP session.
Note: Allow a
1 second delay after sending the <A> command before resuming com-
munications.
Loss of Communications
Making changes to communications with the host such as Baud Rate, Parity, Stop
Bits, LRC , etc. without corresponding changes in linked device(s) can result in the loss
of menu access through If this should occur, you should restore the scanner’s defaults.
Active
Memory
<
A
>
User-Saved
Settings
Initialize
Microscan
Defaults