Microscan MS-710, User Manual

Page: 96 / 186

Bad Symbol Message
6-8
MS-710 Scanner User’s Manual
6–I
/0 Param
e
te
rs Bad Symbol Message
Note: Bad Symbol Message does not apply to multisymbol operations.
Bad Symbol Status
Bad Symbol Message
Usage:
Used in verifying the presence of a symbol that has not been decoded.
Definition:
When enabled, a message is sent to the host when a symbol is detected
but not decoded. See “Transition Counter Threshold” on page 6-8.
The
Bad Symbol output is tied to the transition counter. If during a read
cycle no symbol is decoded and the required setting for the Transition
Sample Threshold is met, a user defined message will be sent to the
host. See “Output Message Flow” on page 9-8.
Serial Cmd: < KMstatus, message>
Serial Cmd: < K’status, message>
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: < KM status ,message >
Serial Cmd:
<
K’ status, message
>
Default: BADCODE
Options: Up to seven ASCII characters (except NUL)
The
Bad Symbol output is tied to the transition counter. If during a read
cycle no symbol is decoded and the required setting for the Transition
Sample Threshold is met, a user defined message will be sent to the
host.