Microscan MS-710, User Manual, Page: 152 / 186

A-12
MS-710 Scanner User’s Manual
App
e
ndix
Transition Counter < KH symbol detect status,transition counter,reflectance threshold>
Scanner Type < KP density>
SYMBOLOGIES
Code 39
< Kp status,check digit status,check digit output status,large inter-
character gap,fixed code length status,fixed code length>
Code 128
< Kt code 128 status,fixed symbol length status,symbol length,UCC/
EAN-128 status,output format,application record separator status,appli-
cation record separator character,application record brackets,applica-
tion record padding>
Interleaved 2 of 5
< Kr status,check digit status,check digit output,symbol length
1,symbol length 2>
Codabar
< Kq status,start & stop match status,start & stop output sta-
tus,large intercharacter gap,fixed symbol length status,symbol
length,check digit type,check digit output>
UPC/EAN
< Ks UPCstatus,EAN status,supplementals status,separator sta-
tus,separator character>
Narrow Margins/
Symbology Identifier
< Ko narrow margins,symbology identifier status>
Background Color < Kx background color>
I/O PARAMETERS
Symbol Data Output < Kl symbol output status,when to output>
Noread Message <
Kk status,message>
Bad Symbol Message < KM status,message>
No Symbol Message < KN status,message>
No Object Message
a
< KO status,message>
Laser On/Off Status < KC laser on/off status>
Beeper < Ku status,volume>
Partial Output <
KY status,start postion,length>
Serial Verification < KS command echo status,command beep status,control/hex output>
MATCHCODE
Matchcode
< Kn matchcode type,sequential matching,match start position,
match length,wild card character,sequence on noread,sequence on mis-
match>
New Master Pin < Kz status>
a. For MS-710s with MS-Sensors.
Table A-7 Complete List of Serial Configuration Commands
Command Title Format