Microscan MS-710, User Manual

Page: 98 / 186

No Object Message
6-10
MS-710 Scanner User’s Manual
6–I
/0 Param
e
te
rs No Object Message
Note: No Object Message is only output if for scanners with an MS-Sensor.
No Object Status
No Object Message
Definition:
When enabled, sends a message to the host at the end of a read cycle
whenever no object is detected.
The
No Object output is tied to the MS-Sensor ( “MS-Sensor” on page
A-15 ) and the reflectance threshold setting ( “Reflectance Threshold”
on page 4-17 ).
Usage: Useful in determining if an expected object has actually passed by during
a read cycle.
Serial Cmd: < KOstatus ,message>
Default: Disabled
Options:
0 = Disabled 1 = Enabled
Serial Cmd: < KO status, message >
Default: MISSING
Options:
Up to seven ASCII characters (except NUL)