Microscan MS-710, User Manual, Page: 79 / 186

Chapter 5 Symbologies
MS-710 Scanner User’s Manual
5-9
5–Symbologi
es
Codabar
Codabar Status
Start & Stop Match Status (Codabar)
Start & Stop Output Status (Codabar)
Usage: Used in photo-finishing and library applications. Formerly used in some
medical applications but not typically used in newer applications.
Definition: Codabar is a 16-character set (0 through 9, and the characters $, :, /, .,
+, and –) with start/stop codes and at least two distinctly different bar
widths.
Serial Cmd: < Kqstatus ,start & stop match,start & stop match output,large interchar-
acter gap,fixed symbol length status,fixed symbol length,check digit
type,check digit output>
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Usage: Used to increase security of symbology.
Definition: Requires the Codabar start and stop characters (a, b, c, or d) to match
before a valid read can occur.
Serial Cmd: < Kq status, start & stop match , start & stop match output,large inter-
character gap,fixed symbol length status,fixed symbol length,check digit
type,check digit output>
Default: Enabled
Options: 0 = Disabled 1 = Enabled
Usage: Used to verify matching.
Definition: Causes the start and stop characters to be transmitted with bar symbol
data.
Serial Cmd: < Kq status,start & stop match, start & stop match output , large inter-
character gap,fixed symbol length status,fixed symbol length,check digit
type,check digit output>
Default: Enabled
Options: 0 = Disabled 1 = Enabled