Microscan MS-710, User Manual

Page: 87 / 186

Chapter 5 Symbologies
MS-710 Scanner User’s Manual
5-17
5–Symbologi
es
Autodiscriminate
Although Autodiscriminate is not a configuration command, but it is included here as
a convenient tool for enabling most symbol types.
Note: If using an I 2/5 symbol, verify that the number of characters in the symbol being
scanned matches the symbol length enabled for the I 2/5 symbol type (default is 10 and 6).
Usage: Commonly used for quick setup mode to detect symbol type. This is par-
ticularly useful for users who might be unfamiliar with their application’s
symbology.
Note: It does not alter individual fields such as Start/Stop, Fixed
Length, etc. These need to be setup individually.
Definition: Enables all available symbology types except PDF417, UCC/EAN 128. The
user may also individually disable/enable each symbology type.
Serial Cmd: <P> Enables all symbologies except noted above
Default: Code 39
(only)
Other
Options:
<Q> Enables Code 39 only
<R> Enables Codabar only
<S> Enables I 2/5 only