Microscan MS-710, User Manual

Page: 27 / 186

Chapter 2 Using ESP
VS-310 Scanner User’s Manual
2-5
2
–Using ESP
Options
You can use the Options menu to tell ESP how you wish
it to perform at startup.
Note: The settings you select here will be saved and be
loaded into ESP when ESP is opened next, whether or not
you save the ESP file to the computer.
Reload Last
At startup, reloads the last file saved to the computer.
Skip ESM Mode
Skips the Easy Setup Mode and opens directly in the App Mode.
Connect Prompt (enabled by default)
At startup, asks if you would like to connect to the scanner.
Receive After Connect
At startup, loads the scanner’s settings into ESP. (This is not recommended if you want
to preserve your ESP settings for future use.)
Enable ‘Send and Save, Including Factory’
Enables the ‘Send and Save, Including Factory’ option in the Send/Recv command.
Model Prompt at Startup (enabled by default)
At startup, prompts you to select a scanner model. If this is unchecked, then ESP will
automatically load the last model accessed.
Connect
Generally
Autoconnect will be the quickest way that ESP
can get connected to a scanner. Autoconnect will try con-
necting at the most common communications settings and
step through the various settings until they match up with
the host’s settings.
When you select
Connect, you will need to manually select
the communications settings from a popup dialog.
View
View tells you what view is current and allows you to quickly move
to other views which are also accessed by clicking the icons on the
toolbars.