SP5736P User’s Manual
49
5.2 Software
Installation
Before operating the remote monitoring software, please first find out the IP
address of the NVR. To find out the IP address, enter OSD setup menu and
select <System>
<Network Setup>
<LAN Setup>
<IP>. Refer to the
following description to install the remote monitoring software.
5.2.1
Change Internet Settings
The PC operating with the remote monitoring software should be set to
accept ActiveX plug-ins. Please follow the steps to set the Internet security
settings appropriately.
Start the IE. It can be started either by clicking on the desktop icon, or by
using the Start menu to access it.
NOTE:
If users wish to use the function "Snapshot" in the remote
monitoring software, users must run IE as administrator. To run IE
as administrator, right click on the IE browser icon on the desktop
and select "Run As Administrator" to launch IE.
NOTE:
Windows IE provides the ActiveX component that is
required for operating the remote monitoring software.
Select <Tools> from the main menu of the browser, click on <Internet
Options>, and then click on the <Security> tab.
Summary of Contents for SP5736P
Page 1: ......
Page 57: ...SP5736P User s Manual 56...
