MicroNet SP5736P, User Manual

Page: 28 / 68

SP5736P User’s Manual
27
If users need to connect and setup IP cameras via network, please follow the steps below.

First select the type of IP camera model on the top-right. Click on Search icon < > at
the top-right corner. The NVR will search the selected models in the same LAN.

Under PnP, switch <On> to <Off> at the preferred channel.

Click on a preferred IP camera in the list. Then click on the channel button whose PnP
function is <Off>.

Under Activate, switch <Off> to <On> at the selected channel. The NVR will begin to
connect the selected IP camera.

If users need to configure the advanced setup, click on IP Camera Setup icon < >
before activating the IP camera.

To further configure Device Setup and Event Setup , users can refer to the steps from
previous subsection.
NOTE:
For more details about IP Camera Setup and Device Setup, please refer to User’s
Manual.
Indication Icons of Connection Status:
The indication icons are next to the channels at camera setting. Users can see the
connection status of IP cameras while setting up the IP cameras.
Ico
n
Description
Ico
n
Description
‧
Successful
Connection
‧
Connecting IP Camera
‧
No IP camera setup
for the channel
‧
Failed Connection
Status Icons of IP Camera:
The table below describes the connection status of IP camera at Live mode.
Ico
n
Description
Ico
n
Description
Connecting IP
Camera
Successful Connection
Failed Connection Resolution Oversize
No Connection