SP5736P User’s Manual
44
ESC
Click on it to exit PTZ Control mode and return to Live full-screen viewing
mode.
Pan/Tilt Speed
Users can select preferred pan/tilt speed.
Direction Buttons
Click on the buttons to pan and tilt the lens of the dome camera.
Auto Focus
Click on this button to adjust focus of the dome camera automatically.
When an IP Dome Camera is connected, users can click on the
PTZ Control
icon in the
function bar to operate the PTZ Control function right at the NVR site. Note that the
IP
Dome Protocol
and the
IP Dome ID
must be set correctly in <IP Camera Setup>. Refer to
the previous section for more details.
Control Buttons in Dome Camera Control Panel:
Ico
n
Description
Ico
n
Description
Ico
n
Description
Iris Close
Iris Open
Focus Far
Focus Near
Zoom Out
Zoom In
Set / Go Preset
Points
Return to Live Mode
Auto Focus
Move the Lens to the
Left
Move the Lens to the
Right
Move Up the Lens
Move Down the Lens
NOTE:
There is no reaction for functions that are not supported by the Dome
Cameras.
Summary of Contents for SP5736P
Page 1: ......
Page 57: ...SP5736P User s Manual 56...
