manualshive.com logo in svg

MicroNet SP5736P, User Manual

Share
Download
MicroNet SP5736P User Manual Download Page 36

SP5736P User’s Manual

 

35 

4. NVR 

Operation 

This chapter will introduce the general operations of the NVR. 
 

4.1   

View Live / Playback Videos 

The general functions in Live and Playback mode are described as following 
sections.  
 

4.1.1  

Viewing Modes 

The NVR provides a few different split window modes for both Standard mode 
and Portrait mode. For general cases, the monitor should be set to Standard 
mode. In some special cases when users need to observe portrait screens, 
please change the monitor to Portrait mode.   
 
Click on any CHANNEL directly to view the corresponding IP camera in 
full-screen mode. In addition, click on the MODE icon to view in multiple 
windows modes. The following figures show the available multiple windows 
modes for Standard mode and Portrait mode accordingly. Click on the MODE 
icon repeatedly to switch to the next available viewing modes. 
 

Standard Mode 

 

 

Portrait Mode 

 

 

NOTE

: Only CH1 and CH2 support portrait screens when the NVR is 

switched to Portrait mode. 

Summary of Contents for SP5736P





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands