SP5736P User’s Manual
48
5.
Remote Monitoring Software
The remote monitoring software is remote browser-based software designed
to operate with the NVR products. Using the software, users are allowed to
view live and recorded videos, and to configure the NVRs remotely via a LAN,
WAN or Internet on a personal computer.
The connected PC will automatically download the remote monitoring
software plug-ins from the NVR when the NVR is connected by entering its IP
address in the address bar on the browser.
The tasks that can be performed with the remote monitoring software are
listed below:
Remote viewing of live/recorded videos
Remote setup of the NVR
Remote control of dome cameras
Alarm notification from the NVR
Up to three connections to one NVR simultaneously, including the preset
“admin” and two other accounts
NOTE:
The Menu function allows users remotely access the NVR’s
OSD setup menu, with some limitations. Refer to the above sections or
the OSD Setup Manual for setting configuration of the NVR.
5.1
Remote Monitoring System Requirements
Items
Requirements
Minimum:
Intel
®
Core™ Duo 2.4GHz
RAM 1GB
Personal Computer
Recommended:
Intel
®
Core™ i7-2600 3.4GHZ
RAM 4 GB
Hard Disk Drive
Requires 20 MB for software installation
Operating System
Windows XP, Windows 7
Web Browser
32 bit, Microsoft Internet Explorer version 8.0 or
above
Monitor Resolution
Minimum 1024×768 with 16-bit color
Minimum:
10/100 Mbps
Network Card
Recommended:
10/100/1000 Mbps
Summary of Contents for SP5736P
Page 1: ......
Page 57: ...SP5736P User s Manual 56...
