MicroNet SP5736P, User Manual

Page: 46 / 68

SP5736P User’s Manual
45
4.4.2 Set Preset Points
The NVR allows users to set preset positions. The amount of preset points
depends on the dome manufacturer.
Follow the steps to set preset points.

Click on a dome camera channel to display it in full-screen.

Then click on the PTZ Control icon and the PTZ Control panel will be
displayed.

Click on the Direction buttons to pan/tilt the dome camera to the desired
position.

Click on the Preset button on the PTZ Control panel to access the Set/Go
Preset function. A numeral keyboard will be displayed as below.
1 2 3
4 5 6
7 8 9
Clear 0
Back
Space
Set
Preset
Go
Preset
Exit
Run
Sequence
Run
Auto Pan
Run
Cruise

Input a desired preset number.

Click on the <Set Preset> button to save the position. Now the preset
position is set and ready to be called.
4.4.3 Call Preset Points
Follow the steps to call preset points.

Click on a dome camera channel to display it in full-screen .

Then click on the PTZ Control icon and the PTZ Control panel will be
displayed.

Click on the Preset button on the PTZ Control panel to access the Set/Go
Preset function. A numeral keyboard will be displayed as below.

Input a desired preset point number.